Plugging In Your Computer - Blackmagicdesign ATEM Television Studio Installation And Operation Manual

Getting Started
13
Set IP Address for your Computer

Plugging in your Computer

You can plug your computer directly into the ATEM switcher so you can control the switcher, load the media
pool with graphics and clips, and change switcher settings.
You will need to connect a computer otherwise you cannot change settings such as the switcher video
standard, as well as down conversion modes, input video connections and labels, as well as customizing
the multi view.
Connecting your computer is easy and after installing the ATEM Switcher Software simply follow the
directions below:
Step 1. Connect an Ethernet cable from the chassis ethernet port labeled Switcher Control to the Ethernet
port of your computer.
If you have a hardware panel installed, and already have this connected to your ATEM, then plug
your computer into the second ethernet port on your hardware panel instead. Now the computer
will talk via your panel to the switcher, and both the hardware panel and this software control
panel can be operated in parallel.
Step 2. Ensure your ATEM switcher is powered on.
Step 3. In the network settings on your computer, enable ethernet, and set the IP address setting to
manual. Then enter the IP address 192. 168.10.1.
Now when you run your ATEM Software Control you should see the buttons on the control tab light up and
show the switcher state after a slight pause.
If you're more technically minded and want to connect your ATEM switcher to your network, then you will
need to change the network settings on your ATEM switcher and control panel. Information on how to do
this is available in the next section. You will need to manually set the IP address for the switcher chassis as
well as all control panels to match your network IP address range. Your ATEM switcher defaults to a fixed
IP address of 192.168.10.240 when shipped and, by using the ATEM Setup Utility, you can customize the IP
address for your custom network configuration.