Switching English/Metric Display Units; Setting A Numeric Passcode "Lockout Mode - Landice 90 Series Owner's Manual

Treadmill Quick Start Guide

Switching English/Metric Display Units

The treadmill display shows English units (mph for speed, lb for
weight) by default. To change to metric units (kilometers per hour for
speed and kilograms for weight):
• Ensure the treadmill is plugged in and powered off.
• Pro Sports: press and hold
while the treadmill is off, then release all. Use the + or - keys to
move up and down the list and select Toggle Units. Then
press the START button to select setting. Press STOP to save
and exit.
• Landice Achieve: press START then hold
simultaneously during the boot-up screen, then release all.
Use the + or - keys to move up and down the list and select
Toggle Units. Then press START to select the setting.
Press STOP to save and exit.
Repeat the same steps to return the display to English units if desired.

Setting a Numeric Passcode "Lockout Mode"

The treadmills have a feature called "Lockout Mode." This feature must
be enabled to allow the end-user to select a four-digit passcode to gain
access to the treadmill and prevent unauthorized persons from
operating the treadmill. Please follow the steps below for your control
panel to activate the passcode.
Pro Sports: Enabling Lockout Mode
1. While the treadmill is off press 3, 9 and START at the same time.
2. Use the "–" to scroll down to Toggle Lockout Mode
3. Press START to turn the lockout feature on or off.
4. Press ENTER to enable and set up a PIN code.
5. Enter a 4-digit PIN using the keypad.
6. Confirm your PIN by re-entering the number using the keypad. Treadmill
will then turn off.
*If you forget your pin code, please use master pin 9010.
8
, and
3 9 START
3
simultaneously
and
9