Viewing Trip Information - Alpine NVD-A111 SMART MAP PRO Owner's Manual

Viewing Trip Information

The odometer displays the route distance and time travelled since the power to the navigation
system was switched on.
1
Press the Menu button to display the
main menu bar. Select Info. and press
ENTER. The Info. menu appears.
Higlight the Trip Information and press
ENTER.
2
The trip information is displayed. To reset
the trip Meter (Distance Driven/Time
Elapsed), press ENTER.
A) Distance Drive refers to the total
distance traveled after the trip meter is
reset.
B) Time Elapsed refers to the total time
traveled after the trip meter is reset.
C) Odometer is the distance travelled
since this system was installed.
D) Total Time is the time elapsed since
this system was installed.
The Trip information will be cleared when the car battery
cable is disconnected.
3
Press the MP/RG button.
The system returns to the map screen.
Info.
ENTER
Trip Information
ENTER
ENTER
MP/RG
73