Setting The Baud Rate; Global Positioning System; Requirements For Using The Gps Feature - Kodak DCS Pro 14n User Manual

Serial Data Collection and Global Positioning System

Setting the Baud Rate

Global Positioning System

Requirements for Using
the GPS Feature
15-4
Before transmitting data between the camera and a connected device, you
must set the correct baud rate required by the device.
NOTE: Please follow the device manufacturer's recommendations for
baud rate.
1. Choose Serial Port from the Tools menu, then choose Baud Rate.
2. Select the required baud rate.
Your camera has a Global Positioning System (GPS) feature, which receives
GPS data from a connected GPS unit and writes information about the
current camera location to the image header.
To use the GPS feature on your camera, you need the following:
• A GPS unit that supports standard NMEA data transfer
• A GPS serial cable (from vendor supplying GPS units)
• A RS232 3.5 mm cable to connect to the camera
April 29, 2004