Black Box LES1101A-R2 User Manual page 76

1101 and 1102 Secure Device Servers
Click Add RPC.
Connected Via presents a list of serial ports and network Host connections that you have set up with device type RPC (but have yet to connect to a
specific RPC device):
When you select Connect Via for a Network RPC connection, then the corresponding Host Name/Description that you set up for that connection
will be entered as the Name and Description for the power device.
Or, if you select to Connect Via a Serial connection, enter a Name and Description for the power device.
Figure 8-2. Add RPC screen.
Select the appropriate RPC Type for the PDU (or IPMI) being connected:
If you are connecting to the RPC via the network, you will be presented with the IPMI protocol options and the SNMP RPC Types currently
supported by the embedded Network UPS Tools.
If you are connecting to the RPC by a serial port, you will be presented with all the serial RPC types currently supported by the embedded
PowerMan and the Black Box power manager:
724-746-5500 | blackbox.com
76