Alerts - Black Box LES1101A-R2 User Manual

1101 and 1102 Secure Device Servers
Notice
Warning
Assume the remote log server needs a username 'name1' and password 'secret':
# config -s config.eventlog.server.username=name1
# config -s config.eventlog.server.password=secret
To set the remote path as '/Black Box/logs' to save logged data:
# config -s config.eventlog.server.path=/Black Box/logs
# config -s config.eventlog.server.type=[none | syslog | nfs | cifs | usb]
If the server type is set to usb, none of the other values need to be set. The mount point for storing on a remote USB device is
/var/run/portmanager/logdir
The following command will synchronize the live system with the new configuration:
# config –a

14.13 Alerts

You can add an email, SNMP, or NAGIOS alert by following the steps below.
The general settings for all alerts
Assume this is our second alert, and we want to send alert emails to john@Black Box.com and sms's to peter@Black Box.com:
# config -s config.alerts.alert2.description=MySecondAlert
# config -s config.alerts.alert2.email=john@Black Box.com
# config -s config.alerts.alert2.email2=peter@Black Box.com
To use NAGIOS to notify of this alert:
# config -s config.alerts.alert2.nsca.enabled=on
To use SNMP to notify of this alert:
# config -s config.alerts.alert2.snmp.enabled=on
Increment the total alerts:
# config -s config.alerts.total=2
Below are the specific settings depending on the type of alert required:
Connection Alert
To trigger an alert when a user connects to serial port 5 or network host 3:
# config -s config.alerts.alert2.host3='host name'
# config -s config.alerts.alert2.port5=on
# config -s config.alerts.alert2.sensor=temp
# config -s config.alerts.alert2.signal=DSR
# config -s config.alerts.alert2.type=login
Signal Alert
To trigger an alert when a signal changes state on port 1:
# config -s config.alerts.alert2.port1=on
# config -s config.alerts.alert2.sensor=temp
# config -s config.alerts.alert2.signal=[ DSR | DCD | CTS ]
# config -s config.alerts.alert2.type=signal
Pattern Match Alert
To trigger an alert if the regular expression '.*0.0% id' is found in serial port 10's character stream.
130
724-746-5500 | blackbox.com