Table of Contents
Advertisement
1101 and 1102 Secure Device Servers
Also, you could use the console server default username and password when you set up the new Remote Desktop User and gave
this User permission to use the advance connection to access the Windows computer:
NOTES (continued): The console server default Username is portXX where XX is the serial port number on the console server.
The default Password is portXX
To use the defaults for a RDP connection to the serial port 2 on the console server, you would have set up a Windows
user named port02.
When the PPP connection has been set up, a network icon will appear in the Windows task bar.
NOTE:
The above notes describe setting up an incoming connection for Windows XP. The steps are similar for Vista and Windows Server
2003/2008, but the set up screens present slightly differently:
You need to put a check in the box for Always allow directly connected devices such as palmtop.
The option to Set up an advanced connection is not available in Windows 2003 if RRAS is configured. If RRAS has been configured, you can
enable the null modem connection for the dial-in configuration.
For earlier version Windows computers, follow the steps in Section B, above. To get to the Make New Connection button:
For Windows 2000, click Start, and select Settings. At the Dial-Up Networking Folder, click Network and Dial-up Connections, and click
Make New Connection. You may need to first set up a connection over the COM port using Connect directly to another computer before
proceeding to Set up an advanced connection.
For Windows 98, double click My Computer on the Desktop, then open Dial-Up Networking and double click.
6.10.2 Set up SDT Serial Ports on Console Server
To set up RDP (and VNC) forwarding on the console server Serial Port that is connected to the Windows computer COM port:
Select the Serial & Network: Serial Port menu option and click Edit (for the particular Serial Port that is connected to the Windows computer
COM port).
On the SDT Settings menu, select SDT Mode (this will enable port forwarding and SSH tunneling) and enter a Username and User
Password.
62
Figure 6-34. Users tab.
724-746-5500 | blackbox.com
Advertisement
Table of Contents
