Dhcp Server; Services - Black Box LES1101A-R2 User Manual

1101 and 1102 Secure Device Servers
The following command will synchronize the live system with the new configuration:
# config -r time

14.19 DHCP Server

To enable the DHCP server on the console management LAN, with settings:
Default lease time
Maximum lease time
DNS server1
DNS server2
Domain name
Default gateway
IP pool 1 start address
IP pool 1 end address
Reserved IP address
MAC to reserve IP for
Name to identify this host
Issue the commands:
# config -s config.interfaces.lan.dhcpd.enabled=on
# config -s config.interfaces.lan.dhcpd.defaultlease=200000
# config -s config.interfaces.lan.dhcpd.maxlease=300000
# config -s config.interfaces.lan.dhcpd.dns1=192.168.2.3
# config -s config.interfaces.lan.dhcpd.dns2=192.168.2.4
# config -s config.interfaces.lan.dhcpd.domain=company.com
# config -s config.interfaces.lan.dhcpd.gateway=192.168.0.1
# config -s config.interfaces.lan.dhcpd.pools.pool1.start=192.168.0.20
# config -s config.interfaces.lan.dhcpd.pools.pool1.end=192.168.0.100
# config -s config.interfaces.lan.dhcpd.pools.total=1
# config -s config.interfaces.lan.dhcpd.staticips.staticip1.ip=192.168.0.50
# config -s config.interfaces.lan.dhcpd.staticips.staticip1.mac=00:1e:67:82:72:d9
# config -s config.interfaces.lan.dhcpd.staticips.staticip1.host=John-PC
# config -s config.interfaces.lan.dhcpd.staticips.total=1
The following command will synchronize the live system with the new configuration:
# config –a

14.20 Services

You can manually enable or disable network servers from the command line. For example, if you wanted to guarantee the following server
configuration:
HTTP Server
HTTPS Server
Telnet Server
SSH Server
SNMP Server
Ping Replies (Respond to ICMP echo requests)
# config -s config.services.http.enabled=on
# config -d config.services.https.enabled
# config -d config.services.telnet.enabled
# config -s config.services.ssh.enabled=on
# config -d config.services.snmp.enabled
# config -d config.services.pingreply.enabled
To set secondary port ranges for any service:
# config -s config.services.telnet.portbase='port base number'
# config -s config.services.ssh.portbase='port base number'
# config -s config.services.tcp.portbase='port base number'
# config -s config.services.rfc2217.portbase='port base number'
# config -s config.services.unauthtel.portbase='port base number
134
200000 seconds
300000 seconds
192.168.2.3
192.168.2.4
company.com
192.168.0.1
192.168.0.20
192.168.0.100
192.168.0.50
00:1e:67:82:72:d9
John-PC
Enabled
Disabled
Disabled
Enabled
Disabled
Disabled
724-746-5500 | blackbox.com
Default: 2000
Default: 3000
Default: 4000
Default: 5000
Default: 6000