Table of Contents
Advertisement
1101 and 1102 Secure Device Servers
Figure 8-11. UPS graph.
Click on any particular All Data for any UPS System in the table for more status and configuration information about the selected UPS System.
Select UPS Logs and you will be presented with the log table of the load, battery charge level, temperature, and other status information from all
the Managed and Monitored UPS systems. This information will be logged for all UPSes that were configured with Log Status checked. The
information is also presented graphically.
Figure 8-12. Log table.
8.2.6 Overview of Network UPS Tools (NUT)
NUT is built on a networked model with a layered scheme of drivers, server and clients. Configure NUT using the Management Console as
described above, or configure the tools and manage the UPSes directly from the command line. This section provides an overview of NUT. You can
find full documentation at http://www.networkupstools.org/doc.
724-746-5500 | blackbox.com
84
Advertisement
Table of Contents
