1101 and 1102 Secure Device Servers
# config -s config.system.smtp.subject=SMTP alerts
To set-up an SMTP SMS server with the same details as above:
# config -s config.system.smtp.server2=mail.Black Box.com
# config -s config.system.smtp.encryption2=SSL (can also be TLS or None )
# config -s config.system.smtp.sender2=John@Black Box.com
# config -s config.system.smtp.username2=john
# config -s config.system.smtp.password2=secret
# config -s config.system.smtp.subject2=SMTP alerts
The following command will synchronize the live system with the new configuration:
# config -a
14.15 SNMP
To set-up the SNMP agent on the device:
# config -s config.system.snmp.protocol=[ UDP | TCP ]
# config -s config.system.snmp.trapport='port number' (default is 162)
# config -s config.system.snmp.address='NMS IP network address'
# config -s config.system.snmp.commnity='community name' (v1 and v2c only)
# config -s config.system.snmp.engineid='ID' (v3 only)
# config -s config.system.snmp.username='username' (v3 only)
# config -s config.system.snmp.password='password' (v3 only)
# config -s config.system.snmp.version=[ 1 | 2c | 3 ]
The following command will synchronize the live system with the new configuration:
# config -a
14.16 Administration
To change the administration settings to:
System Name
System Password (root account)
Description
# config -s config.system.name=og.mydomain.com
# config -P config.system.password
# config -s "config.system.location=Device in office 2"
NOTE:
The -P parameter will prompt the user for a password, and encrypt it. You can encrypt the value of any config element using the -P
parameter, but only encrypted user passwords and system passwords are supported. If any other element value were to be encrypted, the
value will become inaccessible and will have to be reset.
The following command will synchronize the live system with the new configuration:
# config –a
14.17 IP Settings
To configure the primary network interface with static settings:
IP address
Netmask
Default gateway
DNS server 1
DNS server 2
# config -s config.interfaces.wan.address=192.168.0.23
# config -s config.interfaces.wan.netmask=255.255.255.0
# config -s config.interfaces.wan.gateway=192.168.0.1
# config -s config.interfaces.wan.dns1=192.168.0.1
# config -s config.interfaces.wan.dns2=192.168.0.2
132
og.mydomain.com
secret
Device in office 2
(will prompt user for a password)
192.168.0.23
255.255.255.0
192.168.0.1
192.168.0.1
192.168.0.2
724-746-5500 | blackbox.com