Page 1
LES1202A LES1203A-M LES1203A-11G LES1204A-R2 Remote Console Manager Quick Start Guide This Quick Start Guide helps you through installation, configuration, and local operation. For more details, refer to the user manual .
Page 2
Remote Console Manager Quick Start Guide Trademarks Used in this Manual Black Box and the Double Diamond logo are registered trademarks of BB Technologies, Inc. Cisco is a registered trademark of Cisco Technology, Inc. Linux is a registered trademark of Linus Torvalds.
Page 3
NOTE: To download the user manual, go to ftp://ftp.blackbox.com/anonymous/manuals/L/les1202a_user_rev2.pdf, or visit the Black Box Web site and enter LES1202A in the search bar. Step 2: Connect the hardware. Plug the power pack into the AC power receptacle and connect the DC power cable to the 9-12 VDC power socket on the Remote Console Manager.
Page 4
Remote Console Manager Quick Start Guide Step 3: Set up the remote console manager. The default remote console manager IP address is 192.168.0.1 (subnet mask 255.255.255.0). With a Web browser on any computer that is connected through the LAN to the serial device server: •...
Page 5
Remote Console Manager Quick Start Guide Step 4: Configure serial and network devices. Select “Serial & Network: Serial Port,” which will display the label, mode, and protocol options currently set for the serial port. By default, all the serial ports, except Port 1, are set to console server mode (see the user‘s manual for other modes).
Page 6
Remote Console Manager Quick Start Guide Figure 4. Serial & Network: Network Hosts screen. Enter the IP address/DNS name of the host. Edit the permitted services used for accessing this host, for example, HTTPS (TCP port 443), VNC (TCP port 5900), or add custom TCP or UDP port numbers—only the services specified here are tunneled through to the host.
Page 7
Remote Console Manager Quick Start Guide Figure 5. Serial & Network: Users & Groups screen. To grant limited access to the management console, check the “User” group. To grant full access to the management console, check the “Admin” group. By default, the user is granted no management console access.
Page 8
NOTE: To download the user manual, go to ftp://ftp.blackbox.com/anonymous/manuals/L/les1202a_user_rev2.pdf, or visit the Black Box Web site and enter LES1202A in the search bar. NOTE: Also on the Black Box Web site, you will find the SDT Connector software tool. Once you have configured the console server, this tool provides you with secure, point-and-click access to the console server and all the attached devices.