Table of Contents
Advertisement
Chapter 11: System Management
The hard erase will clear all custom settings and return the unit
back to factory default settings (i.e. the IP address will be reset
to 192.168.0.1).
You will be prompted to log in and must enter the default
administration username and administration password:
Username: root
Password: default
Figure 11-2. Hard erase.
11.2 Upgrade Firmware
Before upgrading, make sure you are already running the most current firmware in your gateway. Your console server will not allow you to upgrade
to the same or an earlier version.
The Firmware version is displayed in each page's header.
Or select Status: Support Report and note the Firmware Version.
Figure 11-3. Firmware version.
To upgrade, you first must download the latest firmware image from the
Black Box.web
site.
Save this downloaded firmware image file to a system on the same subnet as the console server.
Download and read the release_notes.txt for the latest information.
To upload the firmware image file to your console server, select System: Firmware.
Specify the address and name of the downloaded Firmware Upgrade File, or Browse the local subnet and locate the downloaded file.
Figure 11-4. Upgrade firmware.
724-746-5500 | blackbox.com
107
Advertisement
Table of Contents
