Fujitsu ETERNUS DX60 S2 User Manual page 98

Appendix A Event Notification Message List
A.2 Message List
Event type
and event
P 0ESSMM00 2
P 0FSSMM00 2
P 11SSMM0p 2
P 12SSMM00 2
FUJITSU Storage ETERNUS DX60 S2 Disk storage system User's Guide -Operation-
SNMP Trap
Trap
TrapItemID Sensor
code
No.
0E00MM00
0F00MM00
1100MM0p
1200MM00
Copyright 2014 FUJITSU LIMITED
Upper: Message
Trap
Lower: Description
Info
-
Controller Module#m(zz xxHz) NAND Controller
Fault <pppppppppppp ssssssssss rrrrr>
NAND Controller is disconnected.
SS: Component subtype
MM: CM module ID (10 – 11)
m: CM number (0 – 1)
zz: Model name (FC4G, SAS, or iSCSI)
xx: CPU frequency (1.2GHz)
pp...: Component number
ss...: Serial number
rr...: Version
- Controller Module#m(zz xxHz) SCU Fault
<pppppppppppp ssssssssss rrrrr>
SCU is disconnected.
SS: Component subtype
MM: CM module ID (10 – 11)
m: CM number (0 – 1)
zz: Model name (FC4G, SAS, or iSCSI)
xx: CPU frequency (1.2GHz)
pp...: Component number
ss...: Serial number
rr...: Version
- Controller Module#m(zz xxHz) Port#p Fault
<pppppppppppp ssssssssss rrrrr>
CM Port is disconnected.
SS: Component subtype
MM: CM module ID (10 – 11)
p: Port number (0 – 1)
m: CM number (0 – 1)
zz: Model name (FC4G, SAS, or iSCSI)
xx: CPU frequency (1.2GHz)
pp...: Component number
ss...: Serial number
rr...: Version
-
Controller Module#m(zz xxHz) FE Expander
Fault <pppppppppppp ssssssssss rrrrr>
CM FE Expander is disconnected.
SS: Component subtype
MM: CM module ID (10 – 11)
m: CM number (0 – 1)
zz: Model name (FC4G, SAS, or iSCSI)
xx: CPU frequency (1.2GHz)
pp...: Component number
ss...: Serial number
rr...: Version
98
Remarks
These messages
are notified when
"Module was bro-
ken" is enabled for
Error Severity Level
in the event notifica-
tion setting.
They are not notified
during maintenance
operations.
P3AM-5512-07ENZ0