Fujitsu ETERNUS DX60 S2 User Manual page 36

Chapter 2 Standard Operations
2.2 Attaching and Removing the Flange Cover
■
Procedure for attaching the flange cover
Attach the flange cover in the following order.
Procedure
1
2
■
Procedure for removing the flange cover
Loosen the thumb screw to remove the flange cover.
FUJITSU Storage ETERNUS DX60 S2 Disk storage system User's Guide -Operation-
Slide the tab inside the top of the flange cover over the top-left corner of the
controller enclosure.
When fitting the flange cover, be careful not to touch the power
IMPORTANT
switch (
Flange cover
Tighten the thumb screw to fasten the flange cover.
Thumb screw
Copyright 2014 FUJITSU LIMITED
).
36
End of procedure
P3AM-5512-07ENZ0