Fujitsu ETERNUS DX60 S2 User Manual page 61

Chapter 5 Installing Optional Products
5.1 Installing Disks
4
5
5-1
5-2
FUJITSU Storage ETERNUS DX60 S2 Disk storage system User's Guide -Operation-
Remove the dummy disk unit from the slot in which the disk is to be installed.
Hook your fingers and push into the holes of the dummy disk unit, and pull it straight out of
the disk slot.
Dummy disk unit
The removed dummy disk unit should be retained for future use.
IMPORTANT
Install the new disk.
Press the catch on the disk lock lever to unlock it.
Catch
1
2
Insert the disk all the way into in the slot, making sure that it is firmly seated and
keeping the lock lever open.
•
IMPORTANT
•
Copyright 2014 FUJITSU LIMITED
Lock lever
Hold the disk with both hands to protect against jarring.
Insert the disk until the lock lever hooks reach the slot
protrusions.
61
P3AM-5512-07ENZ0