Fujitsu ETERNUS DX60 S2 User Manual page 68

Chapter 5 Installing Optional Products
5.2 Installing Drive Enclosures
5
6
FUJITSU Storage ETERNUS DX60 S2 Disk storage system User's Guide -Operation-
Fix the drive enclosure in the rack.
Use the two thumb screws at the front of the drive enclosure to fasten it in the rack.
Thumb screw
Check the settings of the AUTO POWER switch and the MODE SELECT switch.
• AUTO POWER switch
Check that the AUTO POWER switch is set to the OFF position. Do not change to ON.
• MODE SELECT switch
Check that the MODE SELECT switch is set to the ON position. Do not change to OFF.
AUTO POWER
switch
MODE SELECT
switch
Copyright 2014 FUJITSU LIMITED
(Rear rack pillars)
68
End of procedure
P3AM-5512-07ENZ0