Fujitsu ETERNUS DX60 S2 User Manual page 108

Appendix A Event Notification Message List
A.2 Message List
Event type
and event
code
J C3SSMM00 5
J D200dd0n
J DASSdd00 6
J DBSSdd00 6
*1: This row indicates TrapWarningInfo for Trap No. 5 and TrapSensorInfo for Trap No. 6.
FUJITSU Storage ETERNUS DX60 S2 Disk storage system User's Guide -Operation-
SNMP Trap
Trap
TrapItemID (*1)
No.
0B00MM00 0x00 Controller Module#m(zz xxHz) Cache(MEM)
Correctable Error <pppppppppppppppppp
ssssssssssss rrrrrr>
Many correctable errors occurred in the CM memory.
5 D200dd0n 0x00 Power Supply Unit DE#dd/PSU#n Warning
<pppppppppppp ssssssssss rrrr>
PSU error is detected.
DA00dd00 1 DE Exhaust temperature DE#dd Warning
DE exhaust temperature error (Warning) is detected.
DB00dd00 1 DE Intake temperature DE#dd Warning
DE intake temperature error (Warning) is detected.
108
Copyright 2014 FUJITSU LIMITED
Upper: Message
Lower: Description
SS: Component subtype
MM: CM module ID (10 – 11)
m: CM number (0 – 1)
zz: Model name (FC4G, SAS, or iSCSI)
xx: CPU frequency (1.2GHz)
pp...: Component number
ss...: Serial number
rr...: Version
dd: DE-ID ("00" for a controller enclosure)
n: PSU number (0 – 1)
pp...: Component number
ss...: Serial number
rr...: Version
SS: Component subtype
dd: DE-ID ("00" for a controller enclosure)
SS: Component subtype
dd: DE-ID ("00" for a controller enclosure)
Remarks
These messages
are notified when
"Module reported a
Warning" is enabled
for Warning Severity
Level in Setup
Event Notification.
They are not notified
during maintenance
operations.
P3AM-5512-07ENZ0