Fujitsu ETERNUS DX60 S2 User Manual page 71

Chapter 5 Installing Optional Products
5.2 Installing Drive Enclosures
5-2
-
FUJITSU Storage ETERNUS DX60 S2 Disk storage system User's Guide -Operation-
(2) Connect the plug to be connected to DI (IN) port, to the DI (IN) port of the expander
0 (EXP#0).
Drive enclosure
For a dual-controller type, connect the DI (OUT) port at controller 1 (CM#1) of controller
enclosure, to the DI (IN) port at expander 1 (EXP#1) of the drive enclosure 1 with the
miniSAS cable.
Connect the miniSAS cable in the same way as
The following shows the miniSAS connection figure between controller enclosure and
drive enclosure.
Do not connect anything to the DI (OUT) port on the drive enclosure.
IMPORTANT
For a single-controller type
Drive enclosure
Controller enclosure
Copyright 2014 FUJITSU LIMITED
Step
EXP#0
CM#0
71
5-1.
P3AM-5512-07ENZ0