Fujitsu ETERNUS DX60 S2 User Manual page 116

Appendix A Event Notification Message List
A.2 Message List
Event type
and event
I 00000038
I 00000039
I 0000003A
FUJITSU Storage ETERNUS DX60 S2 Disk storage system User's Guide -Operation-
SNMP
Trap
Trap
code
No.
9 Reset group changed
CM#0 port#0 * -
CM#0 port#1 - *
CM#1 port#0 - -
CM#1 port#1 - -
A reset group is changed.
*: A port is selected.
-: A port is not selected.
9 Host affinity group registered (No.%a)
Affinity Group $a:$b (LUN$x-$y)
LUN Volume
$c $d:$e
$c $d:$e
$c $d:$e
:
A host affinity group is registered.
%a: Affinity group number
$a: Affinity group number
$b: Affinity group name
$x-$y: Range of LUN
$c: Logical unit number
$d: Volume number
$e: Volume name
9 LUN mapping registered (CM#%a port#%b Host Affinity Enable)
Host Host Affinity
$a:$b $c:$d
A LUN mapping (with host affinity enabled) is registered.
%a: CM number (0 – 1)
%b: Port number (0 – 1)
$a: Host number
$b: Host name
$c: Host affinity group number
$d: Host affinity group name
Copyright 2014 FUJITSU LIMITED
Upper: Message
Middle: Detail information
Lower: Description
0 1
0 1 0 1
- -
- -
* -
- *
116
Remarks
This message is
notified when
"Reset Group
Changed" is
enabled for Informa-
tional Level in the
event notification
setting.
These messages
are notified when
"LUN Mapping
Defined" is enabled
for Informational
Level in the event
notification setting.
P3AM-5512-07ENZ0