Fujitsu ETERNUS DX60 S2 User Manual page 73

Chapter 5 Installing Optional Products
5.2 Installing Drive Enclosures
6-2
7
8
9
FUJITSU Storage ETERNUS DX60 S2 Disk storage system User's Guide -Operation-
Fix the plug of the power cord with the release tie.
Wrap the release tie around the power cord. The release tie can be fastened from
either side.
Release tie
Connect the power cords to the socket.
Connect the plug at the other end of each power cord to the socket.
Power supply failure can be prevented by connecting the power
IMPORTANT
cords on the PSU#0 side and the PSU#1 side to different power
sources.
CAUTION
• Do not use the server service outlet to connect a power cord for
the ETERNUS DX Disk storage system.
The drive enclosure turns on.
Check that the drive enclosure's POWER LED and READY LED are on.
Click the [Next>] button.
The drive enclosure recognition process is performed. When the process completes, the
drive enclosure's AUTO POWER switch check procedure screen is displayed.
Copyright 2014 FUJITSU LIMITED
Do Not
Drive enclosure
73
P3AM-5512-07ENZ0