Supported Cisco Radio Antennas; Small Form-Factor Pluggable Port - Cisco 860 Series Hardware Installation Manual

Hardware Features

Supported Cisco Radio Antennas

The Cisco 891, Cisco 892, and Cisco 892F come with three removable dipole antennas that can be
replaced using the Cisco approved antenna extenders listed in
Cisco supports only the antennas listed in
Note
Table 1-11 Cisco Antennas Supported on the Cisco 890 Series ISRs
Cisco Part Number
AIR-ANTM2050D-R
AIR-ANTM4050V-R
AIR_ANTM5560P-R

Small Form-Factor Pluggable Port

The SFP port supports auto-media-detection, auto-failover, and remote fault indication (RFI), as
described in the IEEE 802.3ah specification.
See the Cisco 892F data sheet for a list of supported SFPs.
Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide
1-40
Antenna Type Maximum Gain
Omnidirectional 2.0 dBi at 2.4 GHz
5.0 dBi at 5 GHz
Omnidirectional 4.0 dBi at 2.4 GHz
5.0 dBi at 5 GHz
Patch 5.5 dBi at 2.4 GHz
6.0 dBi at 5 GHz
Table
Table 1-11 with the Cisco 890 series dual-band radio module.
Description
This is the default antenna. It is a swivel-mount
dipole dual-band blade antenna. For more
information, see
Dipole Antenna (AIR-ANTM2050D-R).
Ceiling-mount dual-band antenna. This antenna
has a clip that allows it to be mounted on a
drop-ceiling cross member. For more information,
see Cisco Multiband Diversity Omnidirectional
Ceiling-Mount Antenna.
Wall-mount dual-band antenna. For more
information, see
Corner-Mount, or Mast-Mount
Chapter 1 Product Overview
1-11.
Cisco Multiband Swivel-Mount
Cisco Multiband Wall-Mount,
Antenna.
OL-16215-10