Preparing To Connect The Router; Preventing Damage To The Router - Cisco 860 Series Hardware Installation Manual

Preparing to Connect the Router

Preparing to Connect the Router

Before you connect the router to the devices, install the router according to the instructions in
the Router" section on page 2-1

Preventing Damage to the Router

To prevent damage to your router, follow these guidelines when connecting devices to your router:
•
Caution Do not turn on the devices until after you have completed all connections to the router.
•
•
Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide
3-4
Turn off power to the devices and to the router until all connections are completed.
Connect the color-coded cables supplied by Cisco to the color-coded ports on the back panel.
If you must supply your own cable, see
specifications. If this appendix does not provide specifications for a particular cable, we strongly
recommend ordering the cable from Cisco.
"Technical Specifications" section on page A-1
Chapter 3 Connecting the Router
"Installing
for cabling
OL-16215-10