Cisco 860 Series Hardware Installation Manual page 119

Chapter 3 Connecting the Router
Table 3-3
Power and Link
To wireless LAN
14
PoE
15
SFP
To LAN GE/FE line
(860VAE models
only)
Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide
OL-16215-10
Verifying the Router Operation (continued)
LEDs to Check
WLAN LINK
WLAN 2.4 GHz
WLAN 5.0 GHz
PoE 0 (880 and
890 series only)
PoE 1 (880 and
890 series only)
PoE 2 (890 series
only)
PoE 3 (890 series
only)
EN
S
LAN
Normal Patterns
Wireless LAN link status:
Green if at least one client is associated.
•
Off if no client is associated.
•
Wireless LAN 2.4-GHz status:
Green when radio is connected, SSID
•
signal is being transmitted, and client is associated.
Slow blinking when radio is connected, SSID is
•
configured, and signal is being transmitted.
Wireless LAN 5.0-GHz status:
Green when radio is connected, SSID is configured,
•
signal is being transmitted, and client is associated.
Slow blinking when radio is connected, SSID is
•
configured, and signal is being transmitted.
PoE power status:
• Green when connected and powered.
• Amber when there is a fault with the inline power
supply.
Green when the interface is up.
Blinking green indicates port speed. Slow blinking for
100Base SFPs and fast blinking for 1000Base SFPs.
Blinking when there is LAN activity (traffic in either
direction).
Off when the link is down.
Verifying Connections
13
is configured,
3-41