Cisco 860 Series Hardware Installation Manual page 23

Chapter 1 Product Overview
Figure 1-6
1 LEDs
2
3G express card slot—Supports third-party
3G card (Cisco 880G models only)
1. See the
Figure 1-7
Figure 1-7
1 Data BRI
2
Primary WAN port—VDSL/ADSL over
ISDN
3
4-port 10/100 Ethernet switch
4 Serial port—console or auxiliary
5 PoE power connector—optional
1. BRI = Basic rate interface.
2. Ports 0 and 1 provide PoE with the optional PoE module installed.
Caution
Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide
OL-16215-10
Front Panel of the Cisco 880 Series Wireless Data Router
Cisco 880 Series Integrated Services Routers
shows the back panel details of the Cisco 886VA data router.
Back Panel of the Cisco 886VA Router
1 2
1
0
2
The primary WAN port is designed for an RJ-45 connector only. Damage to the primary WAN
port may occur if a non-RJ-45 connector is inserted.
1
3 USB port
1
data sheet for supported vendors.
3
6 Reset button
7
Power connector
8
Earth ground connection
9 Kensington security slot
Cisco 880 Series ISRs
2 3
4 5 6 7 8 9
1-7