Hardware Features; Kensington Lock; Reset Button; Cisco 860Vae Routers-Custom Configuration File - Cisco 860 Series Hardware Installation Manual

Chapter 1 Product Overview

Hardware Features

This section provides an overview of the following hardware features for the Cisco 860 series, 880
series, and 890 series ISRs. A feature summary is available at the end of this section.
•
•
•
•
•
•
•
•
•
•
•

Kensington Lock

A Kensington security slot is located on the router back panel. To secure the router to a desktop or other
surface, use the Kensington lockdown equipment.

Reset Button

The Reset button is used to restore the router to the factory default configurationor to load a custom
configuration file.
There are two different ways to do this:
1.
2.
If you execute a CLI reboot command while the embedded wireless AP is running Cisco Unified IOS
Note
software, the router reboots, but the AP continues running. Clients with Cisco Unified IOS software are
controlled by a wireless LAN controller (WLC) and can be reset only by the controller.
Cisco 860VAE Routers—Custom Configuration File
On Cisco 860VAE routers, the reset button can be used to load a custom configuration file without having
to use the CLI. The configuration file can be located on an external USB flash drive or on the router's
compact flash.
Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide
OL-16215-10
Kensington Lock
Reset Button
LEDs
Memory
USB Port
Fan
Power over Ethernet Module
3G Cellular Data WAN Connectivity
Wireless LAN Connectivity
Small Form-Factor Pluggable Port
Feature Summary
by pressing the Reset button within 5 seconds of powering up the router; or
by pressing the Reset button for 5 seconds while running IOS.
Hardware Features
1-27