Cisco 860 Series Hardware Installation Manual

Cisco 860 Series Hardware Installation Manual

Integrated services routers
Hide thumbs Also See for 860 Series:
Table of Contents

Advertisement

Cisco 860 Series, Cisco 880 Series, and
Cisco 890 Series Integrated Services
Routers Hardware Installation Guide
Americas Headquarters
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134-1706
USA
http://www.cisco.com
Tel: 408 526-4000
800 553-NETS (6387)
Fax: 408 527-0883
Text Part Number: OL-16193-04

Advertisement

Table of Contents
loading

Subscribe to Our Youtube Channel

Summary of Contents for Cisco 860 Series

  • Page 1 Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide Americas Headquarters Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-1706 http://www.cisco.com Tel: 408 526-4000 800 553-NETS (6387) Fax: 408 527-0883 Text Part Number: OL-16193-04...
  • Page 2 You can determine whether your equipment is causing interference by turning it off. If the interference stops, it was probably caused by the Cisco equipment or one of its peripheral devices. If the equipment causes interference to radio or television reception, try to correct the interference by using one or more of the following measures: •...
  • Page 3 This guide provides an overview and explains how to install, connect, and perform initial configuration for the wireless and nonwireless Cisco 860 series, Cisco 880 series, and Cisco 890 series Integrated Services Routers (ISRs). Some information may not apply to your particular router model.
  • Page 4 Means the following information will help you solve a problem. The tip information might not be troubleshooting or even an action, but could be useful information. Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide OL-16193-04...
  • Page 5 Warnung angegebenen Anweisungsnummer nach der jeweiligen Übersetzung in den übersetzten Sicherheitshinweisen, die zusammen mit diesem Gerät ausgeliefert wurden. BEWAHREN SIE DIESE HINWEISE GUT AUF. Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide OL-16193-04...
  • Page 6 Använd det nummer som finns i slutet av varje varning för att hitta dess översättning i de översatta säkerhetsvarningar som medföljer denna anordning. SPARA DESSA ANVISNINGAR Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide OL-16193-04...
  • Page 7 Preface Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide OL-16193-04...
  • Page 8 Brug erklæringsnummeret efter hver advarsel for at finde oversættelsen i de oversatte advarsler, der fulgte med denne enhed. GEM DISSE ANVISNINGER Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide viii OL-16193-04...
  • Page 9 Preface Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide OL-16193-04...
  • Page 10 Appliance and Material Safety Law prohibits the use of UL-certified cables (that have the “UL” shown on the code) for any other electrical devices than products designated by CISCO. The use of cables that are certified by Electrical Appliance and Material Safety Law (that have “PSE” shown on the code) is not limited to CISCO-designated products.
  • Page 11 Read the installation instructions before connecting the system to the power source. Statement 1004 Warning Ultimate disposal of this product should be handled according to all national laws and regulations. Statement 1040 Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide OL-16193-04...
  • Page 12: Related Documentation

    Preface Related Documentation In addition to the Cisco 860 series, Cisco 880 series, and Cisco 890 series ISR Hardware Installation Guide (this document), the Cisco 860 series, Cisco 880 series, and Cisco 890 series ISR documentation set includes the following documents: •...
  • Page 13 The RSS feeds are a free service and Cisco currently supports RSS version 2.0. Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide xiii...
  • Page 14 Preface Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide OL-16193-04...
  • Page 15: Product Overview

    Some illustrations in this document show a wireless router. Both wireless and nonwireless models are available in the Cisco 860 series, Cisco 880 series, and Cisco 890 series ISRs. Port and feature locations are similar for both wireless and nonwireless routers.
  • Page 16: Cisco 860 Series Isrs

    Product Overview Cisco 860 Series ISRs The Cisco 860 series, Cisco 880 series, and Cisco 890 series ISRs have a desktop form factor with built-in wall-mount features. The Cisco 890 series ISRs also have optional rack-mount features. These ISRs are powered by an external power supply adapter. The various models differ in the WAN interface and features that they support.
  • Page 17: Cisco 880 Series Isrs

    Product Overview Figure 1-2 shows the back panel details of the Cisco 861 wireless (861W) ISR. Nonwireless routers do not have antennas on the back panel. However, the feature locations are similar for all Cisco 860 series routers. Figure 1-2...
  • Page 18: Cisco 880 Series Data Routers

    Figure 1-6 show the features available on Cisco 880 series data routers. Some of the features shown may not be available on your router. Depending on the router model, the primary WAN port can be G.SHDSL, VDSLoPOTS, VDSL/ADSL over ISDN, VDSL/ADSL over POTS, or 10/100 FE. See the...
  • Page 19 4-port 10/100 Ethernet switch Power connector Serial port—console or auxiliary Earth ground connection PoE power connector—optional Kensington security slot 1. 887VA-M has Annex M support. Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide OL-16193-04...
  • Page 20 10 Kensington security slot 1. The Cisco 880 series ISRs can include an optional PoE module that provides power to 802.3af-compliant devices connected to ethernet ports 0 and 1. If this feature was not configured with the factory order, you must order and install it to enable the PoE function.
  • Page 21 Cisco 880 series wireless voice router. Figure 1-7 Front Panel of the Cisco 880 Series Wireless Voice Router LEDs USB port Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide OL-16193-04...
  • Page 22 6. Ports 0 and 1 provide PoE with the optional PoE module installed. 7. The Cisco 880 series ISRs can include an optional PoE module that provides power to 802.3af-compliant devices connected to ethernet ports 0 and 1. If this feature was not configured with the factory order, SKU 800-IL-PM-2, you must order and install it to enable the PoE function.
  • Page 23: Cisco 890 Series Isrs

    2. Ports 0 and 1 provide PoE with the optional PoE module installed. 3. The Cisco 880 series ISRs can include an optional PoE module that provides power to 802.3af-compliant devices connected to ethernet ports 0 and 1. If this feature was not configured with the factory order, SKU 800-IL-PM-2, you must order and install it to enable the PoE function.
  • Page 24 DIMM expansion socket that can accept up to 512 MB of additional memory, for a total of 768 MB system memory in Cisco 891 and 892 series ISRs, and a total of 1 GB system memory in Cisco 892F series ISRs Three reverse-polarity threaded Neill-Concelman (RP-TNC) connectors on the back panel for •...
  • Page 25 2. The Data BRI port is available only on the Cisco 892 router models. 3. The V.92 port (not shown) is available only on the Cisco 891 router models and is located between the console port and the Ethernet switch.
  • Page 26: Hardware Features

    SFP port SFP LEDs Hardware Features This section provides an overview of the following hardware features for the Cisco 860 series, 880 series, and 890 series ISRs. A feature summary is available at the end of this section. Kensington Lock •...
  • Page 27: Reset Button

    Note When the CLI reboot command is issued while the embedded wireless AP is running Cisco Unified IOS software, the router reboots and the AP continues running. Clients with Cisco Unified IOS software are controlled by a wireless LAN controller (WLC) and can be reset only by the controller.
  • Page 28 Chapter 1 Product Overview Hardware Features Table 1-1 LED Descriptions for the Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series ISRs (continued) Color Description 860 Series 880 Series 890 Series WLAN Green On—Radio is connected, SSID is configured, and client...
  • Page 29 Chapter 1 Product Overview Hardware Features Table 1-1 LED Descriptions for the Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series ISRs (continued) Color Description 860 Series 880 Series 890 Series Data BRI B1 Green Blinking—B1 channel is either receiving or sending data, —...
  • Page 30 The default flash memory for the Cisco 860 series and 880 series routers is 128 MB. The default flash memory for the Cisco 880 series voice routers and Cisco 890 series routers is 256 MB.
  • Page 31: Usb Port

    The Cisco 890 series ISRs can include an optional PoE module that provides power to 802.3af-compliant devices connected to FE ports 0, 1, 2, and 3. The PoE module is an option available only for the Cisco 880 series and 890 series ISRs and requires a 48-V external power adapter.
  • Page 32: Wireless Lan Connectivity

    Cisco IOS command-line interface (CLI). Table 1-2 describes the radios and antennas for the Cisco 860 series, 880 series, and 890 series routers. The 5-GHz radio operates in the Unlicensed National Information Infrastructure (UNII) 1, 2, 3, 5-GHz frequency bands.
  • Page 33: Feature Summary

    , Cisco IOS Firewall, and All models All models All models IPSec . The Cisco 880 series routers also provide URL filtering. Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide 1-19 OL-16193-04...
  • Page 34 Chapter 1 Product Overview Hardware Features Table 1-4 Hardware Features Available in Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series ISRs (continued) Feature Description 860 Series 880 Series 890 Series Embedded The wireless AP is Wi-Fi CERTIFIED™ Wireless...
  • Page 35 Chapter 1 Product Overview Hardware Features Table 1-4 Hardware Features Available in Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series ISRs (continued) Feature Description 860 Series 880 Series 890 Series V.92 modem Provides dial backup and remote management functions if —...
  • Page 36 Chapter 1 Product Overview Hardware Features Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide 1-22 OL-16193-04...
  • Page 37: Installing The Router

    880 series, and 890 series ISRs. It contains the following topics: Items Shipped with your Router, page 2-2 • Additional Items, page 2-2 • Connections, page 2-2 • Ethernet Devices, page 2-3 • Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide OL-16193-04...
  • Page 38: Items Shipped With Your Router

    Ethernet cables for connecting to the Fast Ethernet (FE) WAN and LAN ports. Connections Obtain a broadband or Ethernet connection from your service provider. Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide OL-16193-04...
  • Page 39: Table Of Contents

    Installing the Router This section describes how to install the Cisco 860 series, 880 series, and 890 series ISRs. These routers can either be installed on a table top or other flat horizontal surface or be mounted on a wall. The Cisco 890 series ISRs may be mounted in a rack.
  • Page 40: Installing Antennas

    Statement 372 Note Before you install the Cisco 890 series wireless router on a table, wall, or rack, connect the antennas to the back panel. It is difficult to attach the antennas after the router is installed. To attach the radio antennas to your wireless router, follow these steps: Manually screw the antennas tight to the RP-TNC connectors on the back of the router.
  • Page 41 Chapter 2 Installing the Router Installing the Router Figure 2-2 Antennas Oriented Vertically Up Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide OL-16193-04...
  • Page 42: Installing On A Table

    2-10. Mounting on a Wall The Cisco 860 series, 880 series, and 890 series ISRs have mounting holes on the bottom of the chassis for mounting the unit on a wall or other vertical surface. Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide...
  • Page 43 Wall-mount holes Hang the router on the screws, and place the power adapter on a nearby horizontal surface. See Step 2 Figure 2-5. Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide OL-16193-04...
  • Page 44 Connect the chassis to a reliable earth ground. For the chassis ground connection procedures, see the Step 3 “Installing the Router Ground Connection” section on page 2-10. Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide OL-16193-04...
  • Page 45: Installing In A Rack

    Installing the Router Installing the Router Installing in a Rack The Cisco 890 series ISRs can be mounted in a rack. To install a Cisco 890 series ISR in a rack, follow these steps: Remove the screws shown in Figure 2-6.
  • Page 46: Installing The Router Ground Connection

    Chassis installation must allow unrestricted airflow for chassis cooling. Step 3 Using two screws for each side (supplied with the rack), attach the Cisco 890 series ISR with rack-mount brackets to a 19-inch rack. Start with the lower pair of screws first, resting the brackets on the lower screws while you insert the upper pair of screws.
  • Page 47 After you install and properly ground the router, you can connect the power wiring, the WAN and LAN cables, and the cables for administrative access as required for your installation. Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide 2-11...
  • Page 48 Chapter 2 Installing the Router Installing the Router Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide 2-12 OL-16193-04...
  • Page 49: Connecting The Router

    C H A P T E R Connecting the Router This chapter describes how to connect Cisco 860 series, Cisco 880 series, and Cisco 890 series Integrated Services Routers (ISRs) to Ethernet devices, Power over Ethernet (PoE), and a network. The...
  • Page 50: Preparing To Connect The Router

    • specifications. If this appendix does not provide specifications for a particular cable, we strongly recommend ordering the cable from Cisco. Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide OL-16193-04...
  • Page 51: Connecting A Pc, Server, Or Workstation

    Step 3 Use the Cisco Configuration Express to configure the Internet connection settings. See Note Cisco Configuration Professional Quick Start Guide for more information. Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide OL-16193-04...
  • Page 52: Connecting A Phone

    Figure 3-2 Connecting a Phone PQRS WXYZ OPER Yellow Ethernet cable RJ-45 port on a phone Ethernet switch port 1 on the router Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide OL-16193-04...
  • Page 53: Connecting An External Ethernet Switch

    Connect the other end of the cable to the available port on the Ethernet switch to add additional Ethernet Step 2 connections. Step 3 Turn on the Ethernet switch. Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide OL-16193-04...
  • Page 54: Connecting The V.92 Modem Port

    Connect one end of the straight-through R-J11 cable to the V.92 port. Step 1 Connect the other end of the straight through R-J11 cable to an RJ-11 telephone wall outlet. Step 2 Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide OL-16193-04...
  • Page 55: Connecting A Terminal Or Pc To The Console Port

    Some laptops and PCs do not come with DB-9 serial port connectors and may require a Note USB-to-serial port adapter. To communicate with the router, start a terminal emulator application. Step 3 Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide OL-16193-04...
  • Page 56: Terminal Emulator Settings

    Figure 3-6 Connecting a Modem to the Aux Port Aux port (RJ-45) DB-9 to DB-25 modem adapter (if required) Light blue console cable Modem Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide OL-16193-04...
  • Page 57: Connecting The 3G Card

    Note Global System for Mobile Communications (GSM) customers need to insert a SIM card, provided by their network carrier, into the 3G card. Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide OL-16193-04...
  • Page 58 Figure 3-8. Step 2 Figure 3-8 Opening the Anti-theft Locking Bracket Front View Back View Pins on the locking bracket for alignment Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide 3-10 OL-16193-04...
  • Page 59 Figure 3-9 Installing the Locking Bracket 3G card Notch on the 3G card Locking bracket Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide 3-11 OL-16193-04...
  • Page 60 Step 6 To connect the antenna to the 3G card, insert the antenna connector into the antenna connector receptacle on the 3G card. Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide 3-12 OL-16193-04...
  • Page 61 1. The antenna connector receptacle is located on either the left, right or front of the card for different SKUs. Please locate the receptacle of your card before plugging in the cable. Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide 3-13...
  • Page 62 PCEX-3G-CDMA-V, PCEX-3G-CDMA-B, CISCO881G-A-K9, CISCO881G-S-K9, CISCO881G-V-K9 Clean the flat surface to which you will affix the antenna. Step 7 Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide 3-14 OL-16193-04...
  • Page 63: Installing The 3G Adapter For Extended Cable/Antenna

    Figure 3-14 Locating the Phillips Screw Phillips screw on the left side of router Air vent holes to be aligned with adapter Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide 3-15 OL-16193-04...
  • Page 64 Align and insert the hooks of the adapter into the air vent holes on the left side router body as shown in Figure 3-16. Figure 3-16 Inserting the Hooks Hooks aligned and inserted into the router. Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide 3-16 OL-16193-04...
  • Page 65 Step 1 and use the screw to attach the adapter to the router as shown in Figure 3-17. Figure 3-17 Attaching the Adapter Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide 3-17 OL-16193-04...
  • Page 66 Table 2 lists the loss information for the ultra-low-loss (ULL) LMR 400 cables available with the adpater for the 3G fixed platforms. Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide 3-18 OL-16193-04...
  • Page 67: Connecting A Data Bri Port

    To avoid damage to the router, do not connect telephone-network voltage (TNV) circuits (such as ISDN or DSL circuits) to safety extra-low voltage (SELV) circuits (such as LAN circuits). Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide 3-19...
  • Page 68 Connect the second unshielded Category 5 cable from the telecommunication service port on the splitter Step 4 to the wall jack to allow a link to the network service provider. Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide 3-20 OL-16193-04...
  • Page 69: Connecting An Fe Line To An Fe Wan Port

    Modem connected to the Internet CAT 5 cable Connect the other end of cable to an available port on the modem. Step 2 Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide 3-21 OL-16193-04...
  • Page 70: Connecting An Ge Line To An Ge Wan Port

    Modem connected to the Internet CAT 5 cable Connect the other end of cable to an available port on the modem. Step 2 Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide 3-22 OL-16193-04...
  • Page 71: Connecting An Xdsl Line

    Connect one end of an RJ-11 (RJ-45 on 880 E models) cable to the port on the router. See Figure 3-23. Step 1 Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide 3-23 OL-16193-04...
  • Page 72: Connecting Power Over Ethernet

    This product must be connected to a power-over-ethernet (PoE) IEEE 802.3af compliant power source Warning or an IEC60950 compliant limited power source. Statement 353 Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide 3-24 OL-16193-04...
  • Page 73: Connecting The Ac Adapter

    48-VDC Power over Ethernet (PoE) power adapter to your router. The PoE adapter provides power to ports 0 and 1 of the 4-port 10/100 FE switch on the Cisco 880 series routers and ports 0,1, 2, and 3 of the 8-port 10/100 FE switch on the Cisco 890 series routers.
  • Page 74 This unit might have more than one power supply connection. All connections must be removed to Warning de-energize the unit. Statement 1028 To connect your Cisco 860 series or Cisco 880 series ISR to an AC power outlet, follow these steps: Connect the router to an AC power outlet as shown in Figure 3-25.
  • Page 75 Figure 3-26 Securing the Power Cord Power lock clip DC plug Power cord Lock holes on either side of the power connector Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide 3-27 OL-16193-04...
  • Page 76: Connecting An Fxs Line

    For connections outside the building where the equipment is installed, the following ports must be connected through an approved network termination unit with integral circuit protection: FXS. Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide 3-28...
  • Page 77 RJ-11 port RJ-11 cable Connect the other end of the cable to the RJ-11 port on the fax machine or telephone. Step 2 Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide 3-29 OL-16193-04...
  • Page 78: Connecting An Fxo Line

    Connecting an FXO Line FXO port Telephone outlet RJ-11 cable Connect the other end of the RJ-11 cable to a telephone wall outlet. Step 2 Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide 3-30 OL-16193-04...
  • Page 79: Connecting A Voice Isdn Bri Line

    Step 1 When the interface is configured as NT and is connecting to a TE device, use a crossover cable. Note Table A-11. Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide 3-31 OL-16193-04...
  • Page 80: Connecting A Small-Form-Factor Pluggable Module

    This section describes how to connect and remove an SFP module and contains the following information: Safety Warnings, page 3-33 • Installing an SFP Module, page 3-33 • Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide 3-32 OL-16193-04...
  • Page 81: Safety Warnings

    Step 1 If the SFP uses a bale-clasp latch (see Figure 3-31), the handle should be on top of the SFP module. Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide 3-33 OL-16193-04...
  • Page 82: Removing An Sfp Module

    SFP model or technology type. For information on the SFP technology type and model, see the label on the side of the SFP. Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide 3-34...
  • Page 83: Online Insertion And Removal

    For a 1000 base SFP, the speed is set to 1000 and duplex is set to full. Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide 3-35...
  • Page 84: Verifying Connections

    To PPP clients Green when either a PPPoE or PPPoA client is running. To VPN tunnel Green when a crypto session is running. Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide 3-36 OL-16193-04...
  • Page 85 12. VPN = Virtual Private Network. 13. SSID = service set identifier. 14. PoE = Power over Ethernet. 15. SFP = small-form-factor pluggable. Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide 3-37 OL-16193-04...
  • Page 86 Chapter 3 Connecting the Router Verifying Connections Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide 3-38 OL-16193-04...
  • Page 87: Initial Configuration

    Cisco Configuration Professional Express After you connect the cables and power up the router, we recommend that you use the Cisco CP Express web-based application to configure the initial router settings. For instructions on how to use Cisco CP Express to configure the router see Cisco CP Express User’s...
  • Page 88: Cisco Configuration Professional Express

    Save your configuration changes regularly to avoid losing them during resets, power cycles, or Note power outages. Use the copy running-config startup-config command at the privileged EXEC mode prompt (Router#) to save the configuration to NVRAM. Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide OL-16193-04...
  • Page 89: Setup Command Facility

    At any point you may enter a question mark '?' for help. Use ctrl-c to abort configuration dialog at any prompt. Default settings are in square brackets '[]'. Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide OL-16193-04...
  • Page 90: Viewing The Configuration

    The following configuration command script was created: hostname Router enable secret 5 $1$D5P6$PYx41/lQIASK.HcSbfO5q1 enable password xxxxxx line vty 0 4 password xxxxxx snmp-server community public Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide OL-16193-04...
  • Page 91: Verifying The Initial Configuration

    “Verifying the Initial Configuration” section on page 4-5 Step 13 verification procedures. After the initial configuration file is created, you can use the Cisco IOS CLI to perform additional configuration. Verifying the Initial Configuration To verify that the new interfaces are operating correctly, perform the following tests: To verify that the interfaces and line protocol are in the correct state—up or down—enter the show...
  • Page 92 For information on how to do basic wireless configuration on your router see the “Basic Wireless Device” chapter of the Cisco 860 Series, Cisco 880, and Cisco 890 Series Integrated Services Routers Software Configuration Guide. Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide OL-16193-04...
  • Page 93: Technical Specifications

    A P P E N D I X Technical Specifications This appendix provides router, port, and cabling specifications for the Cisco 860 series, Cisco 880 series, and Cisco 890 series Integrated Services Routers (ISRs). It contains the following sections: Router Specifications, page A-2 •...
  • Page 94: Router Specifications

    Inline Power-over-Ethernet Adapter Input voltage 85 to 264 VAC Input frequency 47 to 63 Hz Power output 80 W, maximum Output voltage –48 VDC Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide OL-16193-04...
  • Page 95: Wireless Access Point

    ISRs can include an optional PoE module that provides power to 802.3af-compliant devices connected to FE ports 0, 1, 2, and 3. Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide OL-16193-04...
  • Page 96: Console And Auxiliary Port Connector Pinouts

    VDSL2 Port Connector Pinouts Table A-6 lists the VDSL2 connector pinouts. Table A-6 VDSL2 Connector Pinouts (RJ-11-to-RJ-45) RJ-11 Pin Function Unused Unused RING Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide OL-16193-04...
  • Page 97: Adsl2+ Port Connector Pinouts

    V.92 Port Connector Pinouts Table A-8 lists the V.92 connector pinouts. Table A-8 V.92 Connector Pinouts (RJ-11-to-RJ-45) RJ-11 Pin Function Unused Unused RING Unused Unused Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide OL-16193-04...
  • Page 98: G.shdsl Port Connector Pinouts

    Pin 3/T+ Pin 3/R+ Pin 3/T+ Pin 4/R+ Pin 4/T+ Pin 4/R+ Pin 5/R- Pin 5/T- Pin 5/R- Pin 6/T- Pin 6/R- Pin 6/T- Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide OL-16193-04...
  • Page 99: Sfp Port Connector Pinouts

    • Crossover cable • Because of the autocrossover (autosensing) function, both straight-through and crossover cables can be used for the Ethernet LAN port. Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide OL-16193-04...
  • Page 100: Ethernet Cable Specifications

    The maximum length for the Ethernet cables that connect equipment to the router is 328 feet (100 meters). This length is also the maximum distance between the router and the equipment connected to it. Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide OL-16193-04...

This manual is also suitable for:

880 series890 series

Table of Contents