Connecting A Ge Line To An Ge Wan Port - Cisco 860 Series Hardware Installation Manual

Connecting a GE Line to an GE WAN Port

Connecting a GE Line to an GE WAN Port

To connect the Gigabit Ethernet (GE) WAN port on the router, follow these steps:
Step 1 Connect one end of the yellow cable to the GE WAN port as shown in
Figure 3-21
1
2
Connect the other end of cable to an available port on the modem.
Step 2
Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide
3-24
Connecting the GE WAN Port
1
2
Internet Internet Internet
GE WAN port
CAT 5 cable
3
3
Modem connected to the Internet
Chapter 3 Connecting the Router
Figure 3-21.
OL-16215-10