Cisco 880 Series Voice And Data Routers; Cisco 881 Srst And Cisco 888 Srst - Cisco 860 Series Hardware Installation Manual

Chapter 1 Product Overview
1
2
3
4
5
1. The Cisco 880 series ISRs can include an optional PoE module that provides power to 802.3af-compliant devices connected
2. Depending on the router model, the primary WAN port can be G.SHDSL, VDSLoPOTS, or 10/100 FE. The VDSLoPOTS

Cisco 880 Series Voice and Data Routers

The Cisco 880 series voice and data routers provide both voice and data ports. The voice ports managed
voice services that interface with Foreign Exchange Station (FXS), Foreign Exchange Office (FXO), or
BRI connections.

Cisco 881 SRST and Cisco 888 SRST

Figure
Cisco 888 SRST routers. The features available vary, depending on the router model. Some features may
not be available on your router.
Depending on the router model, the primary WAN port can be either G.SHDSL or 10/100 FE. See the
Cisco 880 Series Integrated Services Routers
supported on your router.
Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide
OL-16215-10
ISDN port—not available on 3G models
2
Primary WAN port —G.SHDSL,
VDSLoPOTS, ADSLoPOTS, ADSLoISDN,
or 10/100 FE
Antenna—captive omnidirectional dipole
WLAN antenna (wireless models only)
4-port 10/100 Ethernet switch
Serial port—console or auxiliary
to ethernet ports 0 and 1. If this feature was not configured with the factory order, you must order and install it to enable the
PoE function.
port is in the same location as the G.SHDSL port. The 10/100 FE WAN port is located at the bottom left corner. See
for the location of the 10/100 FE WAN port.
1-10, Figure 1-11, and
6
7
8
9
10 Kensington security slot
Figure 1-12 show the features available on the Cisco 881 SRST and
data sheet for the WAN interface and voice ports that are
PoE power connector for optional PoE
1
module
Reset button
Power connector
Earth ground connection
Cisco 880 Series ISRs
Figure 1-2
1-9