Indicator Lights; Headlamp High Beam Indicator - Victory Motorcycles Hammer 2005 Owner's Manual

INSTRUMENTS, FEATURES AND CONTROLS

Indicator Lights

Neutral Indicator (1)
The neutral indicator illuminates when the transmission is
in neutral, and the ignition key is ON.

Headlamp High Beam Indicator (2)

The headlamp high beam indicator illuminates when the
headlamp switch is set to high beam (see page 40).
Check Engine Indicator (3)
The check engine indicator will illuminate any time the ignition switch is in the ON position and the engine
control module sensors report abnormal sensor or engine operation. The check engine indicator will
continue to illuminate as long as the fault condition exists. It also illuminates momentarily when the
ignition switch is in the ON position and the engine is not running. This demonstrates that the indicator is
functioning properly.
Caution
If the check engine indicator illuminates while the engine is running, a serious engine problem may exist.
Contact an authorized VICTORY dealer as soon as possible.
38
2 3
1