Lubricate Control Cables - Victory Motorcycles Hammer 2005 Owner's Manual

Lubricate Control Cables

The following cables used on the motorcycle require periodic lubrication for smooth operation and maximum
service life:
S Throttle Cables
S Clutch Cable
S Fast Idle Lever Cable
1. Loosen the adjuster of the cable to be lubricated, and disconnect one end of the cable.
2. Lubricate the cable and the inside of the cable housing with VICTORY Cable Lube (PN 2872861) or a
commercially available cable lubricant.
3. Lubricate the cable end with VICTORY All Purpose Grease or equivalent.
4. Reconnect the cable and adjust as necessary.
Clutch Cable Adjustment: See page 106.
Throttle Cable Adjustment: See page 103.
Fast Idle Cable Adjustment: See page 102.
MAINTENANCE
107