Cabling To The Cdm-750 Or Cdm-760; Modem-To-Switch Control And If Interface Connection - Comtech EF Data CRS-170A Installation And Operation Manual

CRS-170A L-Band 1:1 Redundancy Switch
Cables and Connections
4.4

Cabling to the CDM-750 or CDM-760

1. For information on the CDM-750 or CDM-760's 1:1 auto-enable functionality,
2. For information on the cables and cable assemblies specified in this section, see:
4.4.1

Modem-to-Switch Control and IF Interface Connection

Terrestrial data interface components/kits must be ordered separately. See Sect.
4.3.2 for CDM-750/CDM-760 terrestrial data interface configuration and
connection examples and details.
Figure 4-20 shows the control and IF connections for the modem to the CRS-170A Switch. All
control and IF components are provided for the modem in the KT-0000160 CRS-170A L-Band 1:1
Redundancy Kit.
see:
•
Chapter 3. MODEM AND SWITCH CONFIGURATION
• CDM-750 Advanced High-Speed Trunking Modem Installation and
Operation Manual (CEFD P/N MN-CDM750)
•
CDM-760 Advanced High-Speed Trunking Modem Installation and
Operation Manual (CEFD P/N MN-CDM760)
•
Appendix A. CABLE DRAWINGS
4–23
Revision 10
MN/CRS170A.IOM