Gigabit Ethernet Data Interface (Cdi-70) Example - Comtech EF Data CRS-170A Installation And Operation Manual
L-band 1:1 redundancy switch accessory product for use only with comtech ef data cdm-625/a, cdm-840, cdm-750, cdm-760, cdm-570l, cdm-700, cdm-710, cdm-710g, cdm-600l (clm-9600l), and sdm-300l3 modems
Hide thumbs
Also See for CRS-170A:
- Installation and operation manual (154 pages) ,
- Installation and operation manual (176 pages)
Table of Contents
Advertisement
CRS-170A L-Band 1:1 Redundancy Switch
Cables and Connections
4.6.2.4
Gigabit Ethernet Data Interface (CDI-70) Example
See CEFD White Paper "Bridged Ethernet Interface Redundancy" available for
download from Comtech EF Data's Web site (www.comtechefdata.com).
Figure 4-37 shows an example of a CDM-700 1:1 modem configuration with a CDI-70 Gigabit
Ethernet Data Interface installed in Slot 1, and Slot 2 empty. User-provided Ethernet cables are
connected directly to the interface, so no kit is required.
Figure 4-37. CDM-700 Gigabit Ethernet (GigE) 1:1 Example
CDM-700 Block Diagram: Gigabit Ethernet (GigE) Interface
4–43
Revision 10
MN/CRS170A.IOM
Advertisement
Table of Contents
