10/100 Ethernet Interface Examples; Managed Switch Mode (With/Without Ip Packet Processor) - Comtech EF Data CRS-170A Installation And Operation Manual
L-band 1:1 redundancy switch accessory product for use only with comtech ef data cdm-625/a, cdm-840, cdm-750, cdm-760, cdm-570l, cdm-700, cdm-710, cdm-710g, cdm-600l (clm-9600l), and sdm-300l3 modems
Hide thumbs
Also See for CRS-170A:
- Installation and operation manual (154 pages) ,
- Installation and operation manual (176 pages)
Table of Contents
Advertisement
CRS-170A L-Band 1:1 Redundancy Switch
Cables and Connections
4.2.4.9
10/100 Ethernet Interface Examples
4.2.4.9.1
Managed Switch Mode (with/without IP Packet Processor)
Figure 4-13 shows a block diagram and cabling example of a CDM-625/A 1:1 modem configuration
using the 10/100 Ethernet Interface in Managed Switch (Ethernet Bridge) Mode. Direct connection
is made via one to four RJ-45 ports using user-provided Ethernet cables and Layer 2 switches, so
no cables or kit is required. The cabling example depicts all four Ethernet ports used.
Figure 4-13. CDM-625/A 10/100 Ethernet 1:1 Example – Managed Switch Mode
4–13
Revision 10
MN/CRS170A.IOM
Advertisement
Table of Contents
