Cover Sheet Registration - Toshiba e-STUDIO170F Owner's Manual

Cover Sheet Registration

This function enables the at-
1
tachment of a cover sheet to
the document being transmit-
ted.
Press:
Prior to selecting this function
for the first time, you may wish
to prepare a Cover Sheet im-
age (Logo) to be used on the
cover sheet. See Step 4 of this
procedure.
144
2
Display the COVER
SHEET Menu
Enable or Disable the Cover
Sheet attachment.
MENU
+
+
+
+
When "ON" is selected, the fol-
lowing screen is displayed.
LOAD DOCUMENT
1.YES
COVER SHEET
2.NO
2.OFF
1.ON
When "OFF" is selected, the
"COMPLETED" message will
be displayed. The facsimile re-
turns to the Standby Mode.
3
Enable / Disable the Include an Image on
Cover Sheet the Cover Sheet
To include an image (a
scanned company logo, etc.),
press:
(for ON-Enable)
If Cover Sheet has already
been registered, the menu
screen for selecting "DELETE"
or "RETAIN" will be displayed.
(for OFF-Disable)
LOAD DOCUMENT
Go to Step 4.
To omit an image on the cover
sheet, press:
When "NO" is selected, the
"COMPLETED" message will
be displayed. The facsimile re-
turns to the Standby Mode.
4
Load the Image
Document
Load the image document to be
included on the cover sheet.
NOTE:
In preparing a document for
your cover sheet image,
(for YES)
only a limited area of the
sheet will be included as
shown below. Any data out
of the specified range will
be disregarded.
Effective
Range
FeedDirection
(for NO)
When the document is pulled
into the appropriate position,
the following screen is dis-
played.
PRESS [START]
Press:
Image Area
When scanning is complete,
the facsimile returns to the
Standby Mode.
5.9 in.
(150mm)
START