User Test Mode; Automatic Test Mode; Auto Test - Toshiba e-STUDIO170F Owner's Manual

USER TEST MODE - AUTOMATIC TEST MODE

AUTO TEST

AUTO TEST mode permits you to automatically perform a series
of machine tests in one operation.
The test items performed by the AUTO TEST are:
• FLASH ROM TEST
Checks the program data, function data, and language data.
• SRAM TEST
Checks the SRAM Memory.
• DRAM TEST
Checks the DRAM Memory.
• MODEM TEST
Checks the modem and checks for phone line current.
• SCANNER TEST
Checks the image scanner.
• CODEC TEST
Checks the CODEC IC.
• PRINTER TEST
Checks the printer components for proper operation and prints
one test page.
• TONER IC TEST
Checks the TONER IC.
NOTES : • AUTO TEST cannot be performed if data (such as re-
ceived data, delayed transmission, or polling data) is
stored in memory.
• AUTO TEST takes approximately 7.5 minutes to com-
plete.
218
1 2
Display the TEST
MODE Menu
Press:
Press:
MENU
+
The auto test starts,
on the screen indicating that
the test is under way.
TEST MODE
1.AUTO TEST
2.INDIVIDUAL TEST
3.TEST RESULT LIST
To suspend the auto test,
press
3
Select the AUTO Completed the
TEST Menu AUTO TEST
When all the tests end, the
word "OPERATION COM-
PLETED" is displayed on the
screen and a Test Pattern is
printed. After printing, the dis-
appears
play returns to showing the
standby mode screen.
The results of the auto test can
be confirmed with the self test
AUTO TEST
------------------- report. To print the self test re-
port, refer to "PRINTING A
TEST RESULT" on page 230.
If the result of the auto test is
AUTO TEST
judged to be NG, call your ser-
---------------
vice representative.
STOP
.