Toshiba e-STUDIO170F Owner's Manual page 215

Clearing a Recording Paper Jam - continued
10 11
Remove the Process
Unit
Lift up and holding the green Remove the jammed paper in
handle, gently pull out the Pro- the direction of the arrow.
cess Unit. Avoid tearing the paper.
CAUTION:
Always hold the Process CAUTIONS
Unit by the green handle.
NOTE:
Remove the Jammed
12
Paper
(Paper Feed Area)
If the paper is jammed partway
through the Fuser Unit (black
colored housing), remove the
jammed paper in the direction
of the arrow. Avoid tearing the
paper.
• Do no touch the image
Transfer Roller.
NOTE:
• The black colored fuser
If a paper is jammed before
housing may be hot if
toner on the paper is fused,
the machine was in use
be careful not to stain your
prior to this paper jam.
hand or fingers with toner
when removing the jammed
paper.
It is recommended to fold
the edge of jammed paper
as shown in the figure when
you remove the jammed pa-
per.
13
Remove the Jammed OPEN THE RX
Paper (Fuser Area) Cover
Open the RX Cover as shown
above.
Remove the Jammed
14
Paper
(Paper Exit Area)
Pull the leading edge of the re-
cording paper which has been
output in the exit.
Remove the jammed paper in
the direction of the arrow.
Avoid tearing the paper.
213