Default Setting For Document Mode (Resolution And Contrast) - Toshiba e-STUDIO170F Owner's Manual

Default Setting for Document Mode (Resolution and Contrast)

This setting will select the de-
1
fault setting whenever a docu-
ment is set in the facsimile for
transmission. Manual settings
(if selected for a particular doc-
Press:
ument) will take precedence
over default settings.
Display the
2
DOCUMENT MODE
Menu
Select the desired resolution
setting by pressing one of the
following keys.
MENU
Select STANDARD mode for
+
sending normal text and graph-
ics by pressing:
+
Select FINE mode for sending
+
normal text and graphics with
extra clarity by pressing:
+
Select U-FINE (Ultra-Fine) for
sending fine text and graphics
with extra clarity by pressing:
DOCUMENT MODE
1.STANDARD
2.FINE
3.U-FINE
CONTRAST
1.NORMAL
3
Select the
Resolution
Select the default contrast
level by pressing one of the
following keys.
Select NORMAL for normal
documents by pressing:
Select DARKER to darken light
originals (i.e., for documents
with light or faint print) by
pressing:
Select LIGHTER to lighten
dark originals (i.e., for docu-
ments with dark print) by
pressing:
COMPLETED
2.DARKER
Displayed for 2 seconds
3.LIGHTER
Returns to display the SETUP
menu screen.
4
Select Another
Select the Contrast
SETUP Item, or ...
After completing this Configu-
ration Setting, you may con-
tinue to select other settings
referring to their associated
pages for instructions, or press
to exit the Configuration Set-
ting mode and return to the
Standby Mode.
STOP
8 5