Opening/Closing The Housing - Fujitsu PRIMERGY TX300 S5 Operating Manual

CSS components
8.3

Opening/closing the housing

V
CAUTION!
The device can be seriously damaged if it is opened without authori-
zation or if repairs are attempted by untrained personnel.
It is essential to observe the safety instructions in chapter
information" on page
V
CAUTION!
The side/housing cover must be reinstalled as soon as possible due to
cooling, to comply with applicable EMC regulations (regulations on
electromagnetic compatibility) and to protect against fire. The housing
must not be left uncovered for more than 5 minutes.
3
Figure 40: Removing the side cover
Ê Pull the locking lever as far as it will go (1)
This pushes the side cover backward (2).
Ê Remove the side cover (3).
The cover is replaced in the reverse order.
TX300 S5
25.
1
2
Operating manual
Opening/closing the housing
"Important
111