Fujitsu PRIMERGY TX300 S5 Operating Manual page 51

Hardware installation
Figure 6: Mounting the telescopic rail in the Classic Rack
Ê Secure the right and left adapters to the support uprights in the rack with two
(M5) screws each.
Note that the guide nubs on the support systems must fit into the holes in the
support uprights next to the spring nuts.
Ê Secure the left and right support systems to the adapters in the rack with two
(M5) screws and nuts each.
I
If you do not have enough room, slide the neighboring server
forwards (see also the installation instructions for the conversion kit).
Ê Insert the server (see section
TX300 S5
Installing/removing the rack model
"Inserting the server" on page
Operating manual
55).
51