CSS components
1
Figure 32: Identifying and removing a defective fan module
Ê Identify the defective fan module using the LED (1).
If a fan module is defective, the LED flashes orange.
Ê Press the locking mechanism together until it disengages (2).
Ê Remove the fan module from the bay in the direction of the arrow (3).
Ê Set the fan module down on the outside of the server.
V
CAUTION!
Never set a removed/defective fan module down inside the server.
Risk of short circuit!
V
CAUTION!
After a fan module has been removed, it takes approximately
10 seconds for the fan wheel to stop rotating. Do not put your fingers
into the fan wheel while the blades are still turning. Risk of injury!
TX300 S5
2
3
2
Operating manual
Hot-plug components
103