Fujitsu PRIMERGY TX300 S5 Operating Manual page 75

Starting up and operation
LAN indicators
Figure 24: Indicators on the connection panel: LAN indicators
1
LAN activity indicator (service LAN)
Lights up green if a LAN connection exists.
Does not light up if no LAN connection exists.
Flashes green when a LAN transfer is in progress.
2
LAN transfer rate indicator (service LAN)
Lights up green for a LAN transfer rate of 100 Mbit/s.
Does not light up for a LAN transfer rate of 10 Mbit/s.
3
LAN activity indicator (standard LAN)
Lights up green if a LAN connection exists.
Does not light up if no LAN connection exists.
Flashes green when a LAN transfer is in progress.
4
LAN transfer rate indicator (standard LAN)
Lights yellow for a LAN transfer rate of 1 Gbit/s.
Lights up green for a LAN transfer rate of 100 Mbit/s.
Does not light up for a LAN transfer rate of 10 Mbit/s.
I
Depending on the settings in the BIOS, the standard LAN port 1 may also
be used as a service LAN port. You will find further information in the
"D2619 BIOS Setup Utility for PRIMERGY RX300 S5 and TX300 S5"
manual.
TX300 S5
Operating manual
Controls and indicators
1 2 3 4 3 4
75