7.4
General disassembly
This subchapter shows
-
how to replace the power cord,
-
all necessary disassembly steps to gain access to the main assembly (brewing unit,
thermoblock, hydraulic unit and functional block.
7.4.1 Prepare coffee machine for disassembly
10
13
12
•
Open closing handle to check if a capsule is in the brewing unit.
•
Empty water system if hoses have to be detached for repair (see "Empty water
system" on page 19).
•
Switch machine off.
•
Disconnect power plug (40) and let coffee machine cool down.
•
Remove all detachable parts from coffee machine
- waste water container (11) with cup support (12) and drip grid (13)
- capsule container (10)
- water tank with cover (5).
OFF
11
R E P A I R S
5
40
Pixie service manual
31