For replacing the
power cord, remove
right side panel only.
Take care not to
scratch the alumin-
ium surface and keep
the side panels at a safe
place.
32
R E P A I R S
7.4.2 Remove side panels
3
•
Loosen 4 screws (42, torx head TX 15) at each side panel (3).
3
•
Use a screwdriver to release the latches at each side panel (3).
Start by inserting the srewdriver in the 2 semicircular cutouts at the bottom of a side
panel.
•
After releasing the 2 latches at the bottom, swing up and remove side panel.
Pixie service manual
42
3
3