Table of Contents
Advertisement
Repair
General disassembly (stage 1)
Tools:
-
Screwdriver for oval screws
General information:
The screws are labelled with letters (A, B and
C) in the figures.
These refer to the tightening torques for the
screws.
A
=
0,5 to 0,9 Nm
B
=
0,8 to 1,4 Nm
C
=
1,3 to 1,8 Nm
A and B can be tightened by hand
(A = tighten lightly, B = tighten firmly).
For tightening screws labelled C it is im-
perative that a torque wrench is used.
Procedure:
1 Remove water tank (19), drip tray (4), and
capsule container (5).
2 Remove screw (13) at the rear of each
side piece (2 and 3).
3 Place machine on the disassembly tool
(item no. 28087).
4 Remove 2 screws (13) on the underside of
each side piece (2 and 3).
5 Remove side pieces (2 and 3).
Unplug from the mains before
disassembling machine -
appliance must be isolated!
24
Advertisement
Table of Contents
