Performing Your Test - Infopia Eclipse Manual

Performing Your Test

1. Unscrew the lancing device tip
and insert a lancet firmly into the
carrier.
3. The tip of lancing device offers 5
different levels of skin penetration.
To select the best depth: Use 1-2
for soft or thin skin, 3 for average
skin, 4-5 for thick or calloused skin.
Caution
• Use a new sterile, lancet every time you test.
• Do not use lancet if protective cover has been removed or damaged.
• Never share a lancet with anyone.
Maintaining Your Lancing Device:
• Use a new sterile lancet device tip. Carefully stick the protective disk cover back on the
used lancet.
• Grip the holder firmly and pull the lancet safely out of holder. Screw the tip back on the
lancing device.
• Properly discard the used lancet. Clean the lancing device if blood or stain remains.
2. Pinch the lancet and twist off the
protective cover.
Do not discard the cover.
Replace the lancing device tip.
4. Place the lancing device against the tip
of the finger. Press the trigger button.
Your blood sample should now be
ready to be applied to the test strip. Lift
the lancing device out and away.
Click
19