Infopia Eclipse Manual page 20

Performing Your Test
Practice using the lancing device and become accustomed with its use.
Wash your hands with warm, clean water and soap. Dry your hands
completely before testing.
Step 1.
Firmly insert the
logo" facing up. The meter will automatically turn on and display the code number and
testing temperature. After 3 seconds, the code number and testing temperature will
disappear.
When blinking, apply your blood to the test port.
Note: Inserting the test strip in the wrong direction will turn the meter on but you will be
unable to test.
CAUTION !
• If you did not confirm the code in 3 seconds, pull the test strip out of the port, and re-start
the procedure from the beginning.
• If the code on the LCD display window and on the test vial do not match, follow the coding
procedure for accurate results (refer p18).
• If you apply your blood sample too early, the ERROR 5 message will appear on LCD
(refer p 32).
Test Strip into the Meter test strip port with the "Infopia
21