Infopia Eclipse Manual page 16

Before You Test
Check your meter with the check strip.
The "check strip" is to make sure that your meter is functioning properly.
Insert the check strip with the " <<< " facing up in the test strip port of your meter.
The check strip automatically checks your meter when it is inserted into the test port. If the
value displayed is between the ranges of 107 - 127, your meter is furctioning properly.
If the value displayed does not meet the proper range, the LCD will display an "Er 1"
message.
If after reinserting the check strip you receive the same error, please contact your local
representative.
It is important to check your
To ensure proper test results, please check your system periodically.
meter system after purchasing.
17