Infopia Eclipse Manual page 21

Performing Your Test
Test Strip Insertion

Correct
Incorrect
Step 2.
Place your fingertip to the top edge of
will automatically draw into the channel of the test strip. Allow your finger to remain until
you hear a "beep" sound from the
CAUTION !
• If you do not conduct your test after 5 minutes, the meter will automatically power off to save
battery life.
• In this case, you should start your test procedure from the beginning.
22
Applying Blood

Correct
Incorrect
Test Strip. The blood on your finger
Meter. A sample volume of 1μl is required.
Correct
[ Completely filled ]
Incorrect
[ Poorly filled ]