Mitel 5320 Reference Manual page 99

Mitel IP Phone Reference Guide
• If the user is a primary of a monitor group, the call is immediately deflected
and the other members are not able to pickup the call.
• If the user is a secondary of a monitor group, there is no audible alert.
Exceptions
The following exceptions apply:
• Parked Call Reminder overrides DND—Phone rings when a call is parked by
the user when DND is active.
• Call Hold Reminder overrides DND—Hold reminder in effect when user
places a call on hold while DND is active.
• Call Forwarding takes precedence over DND—Call redirects to active CF
destination before Call Coverage is invoked.
To activate the feature, press the key you
The LED on the keys lights to indicate that the feature is active.
The screen flashes Do Not Disturb ON.
Call Waiting Tone
While you are on an active call, Call Waiting Tone (CWT) provides an audible
notification tone alerting you that another call is waiting to be answered on another line
appearance. CWT is only supported for MiNET phones. SIP phones may implement a
local variant of this feature.
To enable CWT, follow these steps:
1. In the left-hand menu, select My Call Handling.
2. In the Call Waiting Tone section, check the box.
3. Click Save.
When left unchecked, the default behavior for phones is
Call Coverage
Using Call Coverage, you can decide how your calls should be handled when you
cannot answer them including when you are logged out of your phone. To view your Call
Coverage options select the My Call Coverage option in the Navigation pane. If allowed
for your phone, this page also allows you to set the twinning option which allows you to
ring another phone (such as your cell phone) simultaneously with your desk phone. See
Twinning.
To set up or change Call Coverage, follow these steps:
1. Select one of the following options:
• None
Personalizing Phone Usage through the Web
programmed for DND.
Splash Ring.
93