Mitel 5320 Reference Manual page 33

Mitel IP Phone Reference Guide
9. Enter the user name of the handset user using the dial pad.
The user name should correspond to the user name that is assigned to the directory
number on networkWCS Hosted PBX.
10. Press OK.
11. Press Yes to save.
12. Press Back repeatedly until you return to the System settings menu.
13. Select VoIP settings and press OK.
14. When prompted for a PIN, enter the PIN (default 0000), and then press OK.
15. Select Accounts and press OK.
16. Select the desired account for the handset and press OK.
Change the Handset Display Name and PIN
After configuring the handsets, change the default username and PIN to prevent
unauthorized access. Note that the handset PIN and the web configuration password
are independent of each other. If you change the handset PIN, it does not affect the web
configuration password.
Change Display Name
To change the Display Name, follow these steps:
1. From Idle mode, press OK, select Settings, and then press theOK key.
2. Select System settings and press the OK key.
3. When prompted for a PIN, enter the PIN (default 0000), and then press theOK key.
4. Select Handset settings and press OK.
5. Select Handset name and press OK.
6. Use the Erase key to delete the existing default name (for example, Handset 1).
7. Enter the handset display name using the dial pad keys.
To enter spaces and special characters, press Options and then press Insert
symbols. Ensure that the handset display name is the same as the name that
appears in the User Configuration form of the networkWCS Hosted PBX for the
handset directory number.
8. Press OK.
? Save is displayed.
9. Press Yes.
Change PIN
To change the PIN, follow these steps:
1. From Idle mode, press the OK key, choose Settings, and then press the OK key.
2. Choose VoIP settings and press the OK key. When prompted for a PIN, enter the
PIN (default 0000), and then press the OK key.
3. Choose Change PIN and press the OK key.
Using Phones 27